View In:
ArcGIS JavaScript
ArcGIS Online Map Viewer
ArcGIS Earth
ArcGIS Pro
Service Description: <div style='text-align:Left;'><div><div><p><span>Alluvial and high-angle fans are complex landforms shaped by frequent natural processes that may pose significant hazards, including debris flows, mudflows, and/or flooding. In response to developing wildfire-ready watersheds and overall preparedness for post-wildfire hazards, there is an urgent need to map areas at risk of geologic hazards. With the continued development of new technologies and the acquisition of higher-resolution digital elevation data, lidar-based technology allows researchers to map fan landforms more precisely to alert cities, counties, landowners, and other stakeholders to areas potentially at risk following a fire event. This study uses high-resolution lidar imagery to compile, map, and define known and previously unrecognized fans.</span></p><p><span>In this study, the Colorado Geological Survey (CGS) provides the lidar-based mapping of alluvial and high-angle fans in Garfield County and Middle Colorado Watershed. “High-angle fans” include debris-flow fans and other unconventional fan landforms (further discussion below). </span></p><p><span>Alluvial Fans:</span></p><p><span>The alluvial fan dataset is intended to capture conventional alluvial fan landforms. According to the American Geosciences Institute, alluvial fans are defined as “… a low, outspread, relatively flat to gently sloping mass of loose rock material, shaped like an open fan or a segment of a cone, deposited by a stream (especially in a semiarid region) at the place where it issues from a narrow mountain valley upon a plain or broad valley, or where a tributary stream is near or at its junction with the mainstream, or wherever a constriction in a valley abruptly ceases, or the gradient of the stream suddenly decreases; it is steepest near the mouth of the valley where its apex points upstream, and it slopes gently and convexly outward with gradually decreasing gradient.” Debris flows, or mudflows, are significant hazards associated with alluvial fans. Debris-flow fans with mean slopes of 20° or less are included in the alluvial fan dataset and are not differentiated from flood-deposited alluvial fans with similar mean slopes. The alluvial fans are mapped in Garfield_Alluvial Fans.</span></p><p><span>High-Angle Fans:</span></p><p><span>The high-angle fans dataset is intended to capture conventional fan landforms with slopes generally exceeding 20° and unconventional fan landforms. These may include debris-flow fans, comingled cones, or aprons of colluvium/talus, alluvium, debris, and other high-angle fan landforms with mean slopes greater than 20°. Like alluvial fans, the high-angle debris-flow fans are mapped downslope from a channel outlet. However, these channels may be steeper and shorter than those that produce conventional alluvial fans. Colluvium and talus may chiefly comprise fan landforms that do not issue from a channel. High-angle fans may have irregular shapes that differ from traditional fan shapes. High-angle debris flow and unconventional fans can pose significant risks, especially in post-fire conditions. The high-angle fans are mapped in Garfield_HighAngleFans</span></p><p><span>Methods:</span></p><p><span>Fan landforms were digitized in ArcGIS Pro from 1-m (3.3 ft) resolution lidar-derived maps obtained from the Colorado Water Conservation Board and Department of Natural Resources (https://coloradohazardmapping.com/lidarDownload). Lidar used for mapping Garfield County and Middle Colorado was collected by Merrick-Surdex Joint Venture, LLP and Merrick & Co. from 9/27/2016 (Garfield) and 10/31/2016 (Mesa). High-resolution aerial imagery was also used to aid in digitizing fans, with sources including Esri’s World Imagery and Google Earth. This study intends to identify and map the extent of fan landforms. This includes interpretations where anthropogenic activities have modified the fans (e.g., roadcuts, housing developments, etc.). The methods of identifying fans from the available lidar imagery consist of the following steps:</span></p><p><span>Generate lidar-derived products, such as hill-shaded imagery, 2- to 5-ft contour lines, and slope maps.</span></p><p><span>Examine the lidar-derived maps at different scales with high-resolution aerial imagery.</span></p><p><span>Review channel lines derived from ArcGIS hydrology tools, the DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm)*, and/or from NHDPlus High Resolution (https://www.usgs.gov/national-hydrography/nhdplus-high-resolution).</span></p><p><span>Digitize fan polygons: Identify and map fan-shaped landforms downslope from stream channels and the fan's estimated apex. </span></p><p><span>Definitions used for defining and mapping fans include:</span></p><p><span>The fan polygon has a mean slope of 20° or less for alluvial fans and greater than 20° for high-angle fans.</span></p><p><span>The apex is identified as the point at the outlet of a basin where the gradient rapidly decreases, confinement rapidly decreases, and sediment deposition occurs on an alluvial plain. A convolution filter generated using focal statistics on the slope map in ArcGIS helps identify the transition from a steep slope with a confined stream channel to an area with an unconfined alluvial fan. </span></p><p><span>The distal extent/edge of the fan is where the fan approaches a creek/river or a slope less than <2° threshold value for the toe of the fan. The extent of the alluvial fans was limited to the most recent depositional features/landforms and contours, and may not encompass the entire fan feature. Anthropogenic activities (e.g., roadcuts, earthwork activities, and housing developments) may influence the placement of the distal edge.</span></p><p><span>The mean slope of individual fan polygons was calculated using Zonal Statistics as a Table from the Spatial Analyst toolbox in ArcGIS Pro using the lidar-derived slope maps as the input parameter.</span></p><p><span>Mean values on polygons may be artificially over-steepened owing to anthropogenic modification or heavy incision by stream channels within the fan polygon boundaries.</span></p><p><span>Map scale is 1:24,000. Therefore, fan polygons with an area less than 2000 m2 are excluded from these datasets.</span></p><p><span>Talus cones, colluvial wedges, and other similar landforms were differentiated from alluvial fans and high-angle debris-flow fans that are deposited by floodwaters and debris-flow events by:</span></p><p><span>Fan angle: talus cones and colluvial wedges tend to have higher slopes due to greater internal friction angles. Fans with slopes </span></p><p><span>greater than 35°, and</span></p><p><span>lack of a source stream.</span></p><p><span>Rocky texture appearance in imagery. While debris-flow deposits may have higher proportions of coarser sediment, colluvial wedges and talus cones tend to comprise cobbles and boulders that appear coarser in imagery. </span></p><p><span>In keeping with 1:24,000-scale mapping protocol determined through the USGS STATEMAP Program, fan landforms with areas less than 2,000 sq-m were generally converted to points. Even though many fans at this scale are clearly visible and easily defined with 1-m resolution lidar, converting these fans to points is intended to align with the map use limitation discussed below. Alluvial fan and high-angle fan points are mapped in Garfield_Alluvial_Fans and Garfield_HighAngleFans, respectively.</span></p><p><span>It should be noted that occasionally, the mapper or author may have mapped geomorphic features that other professionals may classify as another type to capture alluvial and high-angle fans. </span></p><p><span>Field-checking: </span></p><p><span>Field-checking focused on landforms accessible by road and in areas with human activity and ongoing or future development. These landforms are the most likely areas to pose a hazard if they undergo geologic processes. Field-checking may not be thorough. Landforms that have been field-verified are recorded in the dataset. Notes regarding field observations may be included.</span></p><p><span>Quality Control and Quality Assurance (QA/QC)</span></p><p><span>Ten percent of the initially digitized fan polygons were randomly selected and reviewed by a different mapper. The location of the fan apex, the fan shape, and the distal edge were closely examined. Furthermore, any alterations to the fans caused by anthropogenic activities were noted. The supporting maps for the review included the stream flowlines, the catchment map, the slope map, and the convolutional filter separating the steep slope with the confined stream channel from the alluvial plain. If necessary, the fan polygons were adjusted based on the feedback from the review. A second, different mapper conducted another round of cross-mapper review.</span></p><p><span>*DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm). The CGS developed two Python-scripted toolboxes based on DOGAMI's hazards generator toolbox to obtain base maps, initiation and transport, basins, and channel transport potential based on channel confinement and gradient. Refer to the DOGAMI Protocol for Channelized Debris Flow Susceptibility Mapping.</span></p><p><span /></p></div></div></div>
Map Name: Garfield County
Legend
All Layers and Tables
Dynamic Legend
Dynamic All Layers
Layers:
Description: Alluvial and high-angle fans are complex landforms shaped by frequent natural processes that may pose significant hazards, including debris flows, mudflows, and/or flooding. In response to developing wildfire-ready watersheds and overall preparedness for post-wildfire hazards, there is an urgent need to map areas at risk of geologic hazards. With the continued development of new technologies and the acquisition of higher-resolution digital elevation data, lidar-based technology allows researchers to map fan landforms more precisely to alert cities, counties, landowners, and other stakeholders to areas potentially at risk following a fire event. This study uses high-resolution lidar imagery to compile, map, and define known and previously unrecognized fans.In this study, the Colorado Geological Survey (CGS) provides the lidar-based mapping of alluvial and high-angle fans in Garfield County and Middle Colorado Watershed. “High-angle fans” include debris-flow fans and other unconventional fan landforms (further discussion below). Alluvial Fans:The alluvial fan dataset is intended to capture conventional alluvial fan landforms. According to the American Geosciences Institute, alluvial fans are defined as “… a low, outspread, relatively flat to gently sloping mass of loose rock material, shaped like an open fan or a segment of a cone, deposited by a stream (especially in a semiarid region) at the place where it issues from a narrow mountain valley upon a plain or broad valley, or where a tributary stream is near or at its junction with the mainstream, or wherever a constriction in a valley abruptly ceases, or the gradient of the stream suddenly decreases; it is steepest near the mouth of the valley where its apex points upstream, and it slopes gently and convexly outward with gradually decreasing gradient.” Debris flows, or mudflows, are significant hazards associated with alluvial fans. Debris-flow fans with mean slopes of 20° or less are included in the alluvial fan dataset and are not differentiated from flood-deposited alluvial fans with similar mean slopes. The alluvial fans are mapped in Garfield_Alluvial Fans.High-Angle Fans:The high-angle fans dataset is intended to capture conventional fan landforms with slopes generally exceeding 20° and unconventional fan landforms. These may include debris-flow fans, comingled cones, or aprons of colluvium/talus, alluvium, debris, and other high-angle fan landforms with mean slopes greater than 20°. Like alluvial fans, the high-angle debris-flow fans are mapped downslope from a channel outlet. However, these channels may be steeper and shorter than those that produce conventional alluvial fans. Colluvium and talus may chiefly comprise fan landforms that do not issue from a channel. High-angle fans may have irregular shapes that differ from traditional fan shapes. High-angle debris flow and unconventional fans can pose significant risks, especially in post-fire conditions. The high-angle fans are mapped in Garfield_HighAngleFansMethods:Fan landforms were digitized in ArcGIS Pro from 1-m (3.3 ft) resolution lidar-derived maps obtained from the Colorado Water Conservation Board and Department of Natural Resources (https://coloradohazardmapping.com/lidarDownload). Lidar used for mapping Garfield County and Middle Colorado was collected by Merrick-Surdex Joint Venture, LLP and Merrick & Co. from 9/27/2016 (Garfield) and 10/31/2016 (Mesa). High-resolution aerial imagery was also used to aid in digitizing fans, with sources including Esri’s World Imagery and Google Earth. This study intends to identify and map the extent of fan landforms. This includes interpretations where anthropogenic activities have modified the fans (e.g., roadcuts, housing developments, etc.). The methods of identifying fans from the available lidar imagery consist of the following steps:Generate lidar-derived products, such as hill-shaded imagery, 2- to 5-ft contour lines, and slope maps.Examine the lidar-derived maps at different scales with high-resolution aerial imagery.Review channel lines derived from ArcGIS hydrology tools, the DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm)*, and/or from NHDPlus High Resolution (https://www.usgs.gov/national-hydrography/nhdplus-high-resolution).Digitize fan polygons: Identify and map fan-shaped landforms downslope from stream channels and the fan's estimated apex. Definitions used for defining and mapping fans include:The fan polygon has a mean slope of 20° or less for alluvial fans and greater than 20° for high-angle fans.The apex is identified as the point at the outlet of a basin where the gradient rapidly decreases, confinement rapidly decreases, and sediment deposition occurs on an alluvial plain. A convolution filter generated using focal statistics on the slope map in ArcGIS helps identify the transition from a steep slope with a confined stream channel to an area with an unconfined alluvial fan. The distal extent/edge of the fan is where the fan approaches a creek/river or a slope less than <2° threshold value for the toe of the fan. The extent of the alluvial fans was limited to the most recent depositional features/landforms and contours, and may not encompass the entire fan feature. Anthropogenic activities (e.g., roadcuts, earthwork activities, and housing developments) may influence the placement of the distal edge.The mean slope of individual fan polygons was calculated using Zonal Statistics as a Table from the Spatial Analyst toolbox in ArcGIS Pro using the lidar-derived slope maps as the input parameter.Mean values on polygons may be artificially over-steepened owing to anthropogenic modification or heavy incision by stream channels within the fan polygon boundaries.Map scale is 1:24,000. Therefore, fan polygons with an area less than 2000 m2 are excluded from these datasets.Talus cones, colluvial wedges, and other similar landforms were differentiated from alluvial fans and high-angle debris-flow fans that are deposited by floodwaters and debris-flow events by:Fan angle: talus cones and colluvial wedges tend to have higher slopes due to greater internal friction angles. Fans with slopes greater than 35°, andlack of a source stream.Rocky texture appearance in imagery. While debris-flow deposits may have higher proportions of coarser sediment, colluvial wedges and talus cones tend to comprise cobbles and boulders that appear coarser in imagery. In keeping with 1:24,000-scale mapping protocol determined through the USGS STATEMAP Program, fan landforms with areas less than 2,000 sq-m were generally converted to points. Even though many fans at this scale are clearly visible and easily defined with 1-m resolution lidar, converting these fans to points is intended to align with the map use limitation discussed below. Alluvial fan and high-angle fan points are mapped in Garfield_Alluvial_Fans and Garfield_HighAngleFans, respectively.It should be noted that occasionally, the mapper or author may have mapped geomorphic features that other professionals may classify as another type to capture alluvial and high-angle fans. Field-checking: Field-checking focused on landforms accessible by road and in areas with human activity and ongoing or future development. These landforms are the most likely areas to pose a hazard if they undergo geologic processes. Field-checking may not be thorough. Landforms that have been field-verified are recorded in the dataset. Notes regarding field observations may be included.Quality Control and Quality Assurance (QA/QC)Ten percent of the initially digitized fan polygons were randomly selected and reviewed by a different mapper. The location of the fan apex, the fan shape, and the distal edge were closely examined. Furthermore, any alterations to the fans caused by anthropogenic activities were noted. The supporting maps for the review included the stream flowlines, the catchment map, the slope map, and the convolutional filter separating the steep slope with the confined stream channel from the alluvial plain. If necessary, the fan polygons were adjusted based on the feedback from the review. A second, different mapper conducted another round of cross-mapper review.*DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm). The CGS developed two Python-scripted toolboxes based on DOGAMI's hazards generator toolbox to obtain base maps, initiation and transport, basins, and channel transport potential based on channel confinement and gradient. Refer to the DOGAMI Protocol for Channelized Debris Flow Susceptibility Mapping.
Copyright Text: Colorado Geological Survey, Colorado School of Mines, Colorado Water Conservation Board (CWCB)
Spatial Reference:
102654
(2232)
Single Fused Map Cache: false
Initial Extent:
XMin: 2195833.7941754456
YMin: 1551342.0406364342
XMax: 2371342.4742972557
YMax: 1838220.0161179313
Spatial Reference: 102654
(2232)
Full Extent:
XMin: 1996386.9522422254
YMin: 1526625.897742534
XMax: 2570789.316230476
YMax: 1827290.8839278072
Spatial Reference: 102654
(2232)
Units: esriFeet
Supported Image Format Types: PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP
Document Info:
Title: Garfield_AlluvialFans_v20250811
Author:
Comments: Alluvial and high-angle fans are complex landforms shaped by frequent natural processes that may pose significant hazards, including debris flows, mudflows, and/or flooding. In response to developing wildfire-ready watersheds and overall preparedness for post-wildfire hazards, there is an urgent need to map areas at risk of geologic hazards. With the continued development of new technologies and the acquisition of higher-resolution digital elevation data, lidar-based technology allows researchers to map fan landforms more precisely to alert cities, counties, landowners, and other stakeholders to areas potentially at risk following a fire event. This study uses high-resolution lidar imagery to compile, map, and define known and previously unrecognized fans.In this study, the Colorado Geological Survey (CGS) provides the lidar-based mapping of alluvial and high-angle fans in Garfield County and Middle Colorado Watershed. “High-angle fans” include debris-flow fans and other unconventional fan landforms (further discussion below). Alluvial Fans:The alluvial fan dataset is intended to capture conventional alluvial fan landforms. According to the American Geosciences Institute, alluvial fans are defined as “… a low, outspread, relatively flat to gently sloping mass of loose rock material, shaped like an open fan or a segment of a cone, deposited by a stream (especially in a semiarid region) at the place where it issues from a narrow mountain valley upon a plain or broad valley, or where a tributary stream is near or at its junction with the mainstream, or wherever a constriction in a valley abruptly ceases, or the gradient of the stream suddenly decreases; it is steepest near the mouth of the valley where its apex points upstream, and it slopes gently and convexly outward with gradually decreasing gradient.” Debris flows, or mudflows, are significant hazards associated with alluvial fans. Debris-flow fans with mean slopes of 20° or less are included in the alluvial fan dataset and are not differentiated from flood-deposited alluvial fans with similar mean slopes. The alluvial fans are mapped in Garfield_Alluvial Fans.High-Angle Fans:The high-angle fans dataset is intended to capture conventional fan landforms with slopes generally exceeding 20° and unconventional fan landforms. These may include debris-flow fans, comingled cones, or aprons of colluvium/talus, alluvium, debris, and other high-angle fan landforms with mean slopes greater than 20°. Like alluvial fans, the high-angle debris-flow fans are mapped downslope from a channel outlet. However, these channels may be steeper and shorter than those that produce conventional alluvial fans. Colluvium and talus may chiefly comprise fan landforms that do not issue from a channel. High-angle fans may have irregular shapes that differ from traditional fan shapes. High-angle debris flow and unconventional fans can pose significant risks, especially in post-fire conditions. The high-angle fans are mapped in Garfield_HighAngleFansMethods:Fan landforms were digitized in ArcGIS Pro from 1-m (3.3 ft) resolution lidar-derived maps obtained from the Colorado Water Conservation Board and Department of Natural Resources (https://coloradohazardmapping.com/lidarDownload). Lidar used for mapping Garfield County and Middle Colorado was collected by Merrick-Surdex Joint Venture, LLP and Merrick & Co. from 9/27/2016 (Garfield) and 10/31/2016 (Mesa). High-resolution aerial imagery was also used to aid in digitizing fans, with sources including Esri’s World Imagery and Google Earth. This study intends to identify and map the extent of fan landforms. This includes interpretations where anthropogenic activities have modified the fans (e.g., roadcuts, housing developments, etc.). The methods of identifying fans from the available lidar imagery consist of the following steps:Generate lidar-derived products, such as hill-shaded imagery, 2- to 5-ft contour lines, and slope maps.Examine the lidar-derived maps at different scales with high-resolution aerial imagery.Review channel lines derived from ArcGIS hydrology tools, the DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm)*, and/or from NHDPlus High Resolution (https://www.usgs.gov/national-hydrography/nhdplus-high-resolution).Digitize fan polygons: Identify and map fan-shaped landforms downslope from stream channels and the fan's estimated apex. Definitions used for defining and mapping fans include:The fan polygon has a mean slope of 20° or less for alluvial fans and greater than 20° for high-angle fans.The apex is identified as the point at the outlet of a basin where the gradient rapidly decreases, confinement rapidly decreases, and sediment deposition occurs on an alluvial plain. A convolution filter generated using focal statistics on the slope map in ArcGIS helps identify the transition from a steep slope with a confined stream channel to an area with an unconfined alluvial fan. The distal extent/edge of the fan is where the fan approaches a creek/river or a slope less than <2° threshold value for the toe of the fan. The extent of the alluvial fans was limited to the most recent depositional features/landforms and contours, and may not encompass the entire fan feature. Anthropogenic activities (e.g., roadcuts, earthwork activities, and housing developments) may influence the placement of the distal edge.The mean slope of individual fan polygons was calculated using Zonal Statistics as a Table from the Spatial Analyst toolbox in ArcGIS Pro using the lidar-derived slope maps as the input parameter.Mean values on polygons may be artificially over-steepened owing to anthropogenic modification or heavy incision by stream channels within the fan polygon boundaries.Map scale is 1:24,000. Therefore, fan polygons with an area less than 2000 m2 are excluded from these datasets.Talus cones, colluvial wedges, and other similar landforms were differentiated from alluvial fans and high-angle debris-flow fans that are deposited by floodwaters and debris-flow events by:Fan angle: talus cones and colluvial wedges tend to have higher slopes due to greater internal friction angles. Fans with slopes greater than 35°, andlack of a source stream.Rocky texture appearance in imagery. While debris-flow deposits may have higher proportions of coarser sediment, colluvial wedges and talus cones tend to comprise cobbles and boulders that appear coarser in imagery. In keeping with 1:24,000-scale mapping protocol determined through the USGS STATEMAP Program, fan landforms with areas less than 2,000 sq-m were generally converted to points. Even though many fans at this scale are clearly visible and easily defined with 1-m resolution lidar, converting these fans to points is intended to align with the map use limitation discussed below. Alluvial fan and high-angle fan points are mapped in Garfield_Alluvial_Fans and Garfield_HighAngleFans, respectively.It should be noted that occasionally, the mapper or author may have mapped geomorphic features that other professionals may classify as another type to capture alluvial and high-angle fans. Field-checking: Field-checking focused on landforms accessible by road and in areas with human activity and ongoing or future development. These landforms are the most likely areas to pose a hazard if they undergo geologic processes. Field-checking may not be thorough. Landforms that have been field-verified are recorded in the dataset. Notes regarding field observations may be included.Quality Control and Quality Assurance (QA/QC)Ten percent of the initially digitized fan polygons were randomly selected and reviewed by a different mapper. The location of the fan apex, the fan shape, and the distal edge were closely examined. Furthermore, any alterations to the fans caused by anthropogenic activities were noted. The supporting maps for the review included the stream flowlines, the catchment map, the slope map, and the convolutional filter separating the steep slope with the confined stream channel from the alluvial plain. If necessary, the fan polygons were adjusted based on the feedback from the review. A second, different mapper conducted another round of cross-mapper review.*DOGAMI Debris Flow Hazard ArcPRO Toolbox (https://pubs.oregon.gov/dogami/sp/SP-53/p-SP-53.htm). The CGS developed two Python-scripted toolboxes based on DOGAMI's hazards generator toolbox to obtain base maps, initiation and transport, basins, and channel transport potential based on channel confinement and gradient. Refer to the DOGAMI Protocol for Channelized Debris Flow Susceptibility Mapping.
Subject: The metadata provides a summary, description, methods, credits, and extent of the item. Datasets included in this project are geodatabases containing polygon feature classes of mapped alluvial fans and high-angle fans: Garfield County Alluvial Fans (Garfield_Alluvial_Fans) and Garfield_HighAngleFans (Garfield_HighAngleFans).
The description section highlights the crucial role of lidar-based technology in mapping alluvial fans and other high-angle fans. This advancement in the field significantly improves mapping precision, which is essential because mapping fan landforms has many implications. Its application in areas at risk of geologic hazards is particularly noteworthy, as the benefits of this technology extend to various stakeholders, including cities, counties, landowners, and other constituents.
Category:
Keywords: Garfield County,Middle Colorado Watershed,Alluvial Fans
AntialiasingMode: Fast
TextAntialiasingMode: Force
Supports Dynamic Layers: true
MaxRecordCount: 2000
MaxSelectionCount: 2000
MaxImageHeight: 4096
MaxImageWidth: 4096
Supported Query Formats: JSON, geoJSON, PBF
Supports Query Data Elements: true
Min Scale: 0
Max Scale: 0
Supports Datum Transformation: true
Child Resources:
Info
Dynamic Layer
Supported Operations:
Export Map
Identify
QueryLegends
QueryDomains
Find
Return Updates